What is tile grouting agent? Ceramic tile caulking agent, also known as facing tile caulking agent, is a material made of cement, quartz sand, filler pigments and a variety of additives that are mechanically mixed evenly.
For those who come into contact with this product for the first time, it will definitely be strange. In fact, it plays an important role in tile paving in our lives. It is very widely used in stickers. It is necessary to fill the gaps between brick boxes and bricks. This is an essential item because it can help us to fill some gaps perfectly, thus giving us The construction brings good results.
The role of tile grout in home life should not be underestimated. After the tile grout solidifies, it will stick to the joints of the tiles. It will form a clean surface as smooth as porcelain, which is wear-resistant, waterproof, oil-proof, does not stick to dirt, has excellent self-cleaning properties, is not easy to harbor dirt and evil, is easy to clean, and can be wiped clean, thus completely solving common problems. The joints of the tiles are dirty, dark and difficult to clean. It can be used whether it is a newly installed tile joint or a tile joint that has been used for many years. Prevent gaps from turning black and dirty, affecting indoor aesthetics, and preventing mold from breeding and endangering human health.
So how to use tile grout?
Pour the special mixing liquid into a clean container, slowly add the tile grout, and stir evenly To a uniform paste with no lumps of dough, let it sit for 3-5 minutes, then stir again. Finally, wet the base surface of the wall or floor with clean water. The adhesive can only be applied when there is no clear water on the surface. After confirming that there is no exposed water on the base surface, you can lay the tiles. One thing to note is that a joint of 2mm or more should be reserved to facilitate the construction of the caulking agent. After three days of application, the caulking construction can be carried out. Squeeze the mixed caulking agent into the reserved gap along the diagonal direction of the masonry. Do not leave any space. Use a glue that is at an angle to the gap. Actions will be redundantScrape off the slurry, being careful not to bring out the slurry embedded in the gap. Wait 10-15 minutes or after the surface is dry, wipe the surface with a sponge, slightly damp cotton cloth or towel in a circular motion, and further press the caulking agent so that The caulking agent is dense and the surface is smooth. After the caulking agent dries, wipe the surface of the masonry with a sponge or clean cotton cloth to remove the remaining caulking agent.
Precautions for using ceramic tile grout:
First: Do not use acidic cleaners to clean caulked finishes.
Second: Suitable for use in an environment of 5 to 40 degrees Celsius. Do not construct under rain. Avoid rain erosion within 12 hours after construction is completed. .
Third: Do not mix the dried glue with water before use.
Fourth: The suitable gap width is 1.5~12mm, and gaps larger than 12mm can be customized.
Fifth: It is advisable to leave expansion joints during large-scale construction. Maintenance should be done for the first time 24 hours after construction and the second time after 48 hours.
Tile grout is widely used. It is not only used for ceramic tiles, but also for mosaics, stone, wood boards, glass, and aluminum. Gap decoration of plastic boards and other materials.
